Connect Optional Peripherals (Scanner, Hard Disk) - Tektronix Phaser 780 Install Manual

Connect optional peripheral devices
34
Phaser 780 Color Laser Printer
N
O T E
Requires a SCSI port, available on optional printer configuration.
The printer's SCSI ID number is 7; available SCSI ID numbers for peripheral
devices are 0 – 6. You can connect the following peripheral devices to the SCSI
port:
Scanner
Allows you to use your printer as a color copier.
External SCSI hard disk
downloadable fonts or printer collation.
1.
Turn off the printer and all SCSI devices before plugging in or
unplugging any cables.
C
A U T I O N
Failure to turn off the printer and any peripherals may result in damage to
them.
2.
Connect the cable to the device and to the SCSI port on your printer.
Terminate the final SCSI device on a SCSI chain.
Refer to the printer's CD-ROM or the Tektronix web site for detailed
information on connecting a SCSI device to your printer.
Provides additional storage for
3094-60