Table of Contents
Advertisement
Driver Settings
Changing the data format used by the driver affects print speed in different operating
systems:
Macintosh: the driver defaults to binary data. This is recommended.
Windows 95/Windows 98: Under the Set Up tab, click Expert Options, then click
PostScript. Check Printer Properties. Put a check in the Use Automatic Data
Format box. This selects the correct data format for the connection method.
Windows NT 4.x: In Printer Properties, click the Device Settings tab. Locate the
Output Protocol and type Binary for network connections. If connected via
parallel, change from ASCII to BCP.
Windows 2000: Under the Tektronix Features tab, which is available from the
File Print Dialog or Print Manager Printer Properties, check Printer Properties.
If printing is slow, refer to the TekSMART knowledge base for solutions:
www2.tek.com/TekSMART/
1.
In the Go to a specific document number field, enter the number 37185 and click Go.
2.
A solution for Slow Printing, Print Time Too Long is resolved in the article, Items to
Check for Slow Printing Issues.
Advanced Features and Troubleshooting Manual
Troubleshooting Phaser 750 Printers
71
Advertisement
Table of Contents
