Related Manuals for Hioki SR-2
Summary of Contents for Hioki SR-2
- Page 1 SR-2 Instruction Manual STANDARD RESISTOR Read carefully before use. Keep for future reference. Feb. 2024 Revised edition 1 [600196571] SR2A981-01 HIOKI SR2A981-01...
- Page 2 HIOKI SR2A981-01...
-
Page 3: Table Of Contents
Part Names ............................6 Preparing for Measurement ........................7 ......................7 When using with the SM7110 When using with the SM-8000 series ....................8 Making Measurements ........................9 Specifications ............................9 Calibration and Maintenance ......................9 Dimensions ............................10 Internal Circuit ............................. 11 Warranty Certificate SR2A981-01 HIOKI SR2A981-01... - Page 4 Contents HIOKI SR2A981-01...
-
Page 5: Introduction
Introduction Introduction Thank you for choosing the Hioki SR-2 Standard Resistor. To ensure your ability to get the most out of this device over the long term, please read this manual carefully and keep it available for future reference. The latest edition of the instruction manual The contents of this manual are subject to change, for example as a result of product improvements or changes to specifications. -
Page 6: Overview
A terminal to connect to a guard of insulation tester (guard tip of red measuring rod) to prevent current leakage. Grounding terminal A terminal to ground this unit, when influenced by external inductance or noise. 0 terminal A reference terminal on each resistance range, each connected internally. HIOKI SR2A981-01... -
Page 7: Preparing For Measurement
When using with the SM7110 SM7110 Super Megohm Meter Black SR-2 Connect the L2230 Pin Type Lead (Red) and L2231 Pin Type Lead (Black) to the SM7110 Super Megohm Meter. Connect the L2230 to the device’s terminal of the value to be calibrated. -
Page 8: When Using With The Sm-8000 Series
Connect a black measuring rod to 0 terminal, and a red measuring rod to the terminal of the value to be calibrated. Let the super megohmmeter being in measuring condition, and wait a few minute until the indicating needle is stable. HIOKI SR2A981-01... -
Page 9: Making Measurements
Instruction Manual (this manual) Calibration and Maintenance • This device should be calibrated periodically. • The dust adhered to the panel will cause the error. • If the device seems to be malfunctioning, contact your authorized Hioki distributor or reseller. HIOKI SR2A981-01... -
Page 10: Dimensions
Dimensions Dimensions Unit: mm HIOKI SR2A981-01... -
Page 11: Internal Circuit
Internal Circuit Internal Circuit Guard terminal Grounding terminal HIOKI SR2A981-01... - Page 12 Internal Circuit HIOKI SR2A981-01...
- Page 13 HIOKI SR2A981-01...
- Page 14 HIOKI SR2A981-01...
- Page 15 HIOKI SR2A981-01...
- Page 16 HIOKI SR2A981-01...
Need help?
Do you have a question about the SR-2 and is the answer not in the manual?
Questions and answers