Installation Instructions - ADJ FL1300 User Manual

Table of Contents

Advertisement

I N S TA L L AT I O N I N S T R U C T I O N S
IPX4 RATED
An IP rated lighting fixture is commonly installed in outdoor environments and has been designed
with an enclosure that effectively protects the ingress (entry) of external foreign objects such as dust
and water. The International Protection (IP) rating system is commonly expressed as "IP" (Ingress
Protection) followed by two numbers (i.e. IP20) where the numbers define the degree of protection.
The first digit (Foreign Bodies Protection) indicates the extent of protection against particles entering
the fixture, and the second digit (Water Protection) indicates the extent of protection against water
entering the fixture.
An IPX4 rated lighting fixture has been designed for temporary outdoor environments. It has
NOT been tested to protect against the ingress of dust (X) but has been tested to protect from
splash of water in any direction (4).
PERMANENT OUTDOOR AND/OR MARINE/COSTAL INSTALLATIONS
Please note although this fixture is IP rated, this fixture is NOT suitable for permanent outdoor and/or
marine environment installations. Installing this fixture in permanent outdoor and/or marine environment
installation may cause corrosion and/or excessive wear to the interior and/or exterior components of
the fixture. Damages and/or performance issues resulting from installation in a permanent outdoor
and/or marine environment installation will void the manufacturer's warranty and will NOT be subject
to any warranty claims and/or repairs.
FLAMMABLE MATERIAL WARNING
Keep fixture at least 5.0 feet (1.5m) away from flammable material and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installations.
ENSURE ALL CONNECTIONS AND END CAPS ARE PROPERLY SEALED WITH A NON-
CONDUCTIVE DIELECTRIC GREASE (AVAILABLE AT MOST ELECTRICAL SUPPLIERS)
TO PREVENT WATER INGRESS/CONDENSATION AND/OR CORROSION.
USE CAUTION WHEN POWER LINKING FIXTURES OF DIFFERING MODEL TYPES,
AS THE POWER CONSUMPTION OF THESE DIFFERING MODELS MAY EXCEED THE
MAXIMUM POWER OUTPUT RATING OF THIS FIXTURE. CHECK THE SILK SCREEN
FOR MAX AMPERAGE.
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Encore burst 200

Table of Contents