Installation - ADJ JOLT 300 User Instructions

Jolt 300
NOTICE: The suitable enviromental temperature for this lighting fixture is between -25˚ C to 45˚ C.
Do not place this lighting fixture in an enviroment where the temperatures are under or above the
temperatures stated above. This will allow the fixture to run at its best and help prolong the fixture
life.
OMEGA BRACKET & SAFETY CABLE ATTACHMENT
1.
Omega Bracket
Yoke
Attachment Point
Screw one clamp via a M12 screw and nut into the Omega bracket. Insert the quick-lock fasteners of the
Omega bracket's into the respective holes on the bottom of the Jolt 300. Tighten the quick-lock
fasteners fully clockwise. Pull the safety cable through the Safety Loop located on the bottom of the
unit and over the trussing system or a safe fixation spot. Insert the end in the carabine and tighten
the safety screw.
ADJ Products, LLC - www.adj.com - Jolt 300 User Manual Page 8
Omega Bracket
Attachment Points
YOKE ATTACHMENT
1.
Yoke
Attachment Point
Yoke
2.
Safety Cable
Safety Cable
Attachment Point
2.

Installation