Table of Contents
Advertisement
Micro 3D II
Unpacking:
Thank you for purchasing the Micro 3D II by ADJ Prod-
ucts, LLC. Every Micro 3D II has been thoroughly tested and has been
shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all equipment necessary to operate the unit has
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions.
Introduction:
The Micro 3D II is an simple, small, bright, green and
red laser fixture. The Micro 3D II produces more than 200 beams with
star patterns that may be projected on a wall, ceiling, or dance floor.
The Micro 3D II is a stand alone fixture with 2 operating modes; sound
active and auto. The Micro 3D II's compact, light weight case design
make it ideal for mobile entertainers, bands, night clubs and bar. For
best results use fog or special effects smoke to enhance the beams
projections.
Customer Support:
ADJ Products, LLC provides a toll free cus-
tomer support line, to provide set up help and to answer any question
should you encounter problems during your set up or initial operation.
You may also visit us on the web at www.adj.com for any comments
or suggestions. For service related issue please contact ADJ
Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Stan-
dard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
ADJ customer support.
PLEASE recycle the shipping carton whenever possible.
ADJ Products, LLC - www.adj.com - Micro 3D II Instruction Manual Page 2
General Introduction
. Service
®
Micro 3D II
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
Micro 3D II
• 30mW Green Laser
• 80mW Red Laser
• 2 Operating Modes - Sound Active Mode & Auto Mode
• UC Laser IR Wireless Remote Control & Airstream IR (Compatible)
• Dual Hanging Bracket
Micro 3D II
The Micro 3D II carries a 1 Year (365 Days) limited warranty. Please
fill out the enclosed warranty card to validate your purchase. All
returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) number. If the
unit is under warranty you must provide a copy of your proof of pur-
chase invoice. Please contact ADJ customer support for a R.A. num-
ber.
ADJ Products, LLC - www.adj.com - Micro 3D II Instruction Manual Page 3
General Instructions
Features
Warranty Registration
Advertisement
Table of Contents
