ADJ FL1300 User Manual page 17

I N S TA L L AT I O N I N S T R U C T I O N S
ADJUSTING LED LENS POSITION DEGREE
The LED lens position can easily be adjusted manually from the default 0-degree position, to 7.5+ or
15+ degrees (UP) and -7.5 and -15.0 degrees (DOWN). Simply push the LED lens array either UP or
DOWN by hand until the desired angle is achieved. The LED lens array movement can be adjusted
by loosening or tightening the small screw on the side of the fixture using a matching size hex key
(not included).
17