Table of Contents
Advertisement
I N S TA L L AT I O N
DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!
Fixture MUST be installed following all local, national, and country commercial electrical and con-
struction codes and regulations.
When installing the unit, the trussing or area of installation must be able to support at least 10 times
the weight of the unit and any attached accessories without any deformation. The unit must be
secured with a secondary safety attachment, e.g. an appropriately-rated safety cable.
Before rigging/mounting a fixture to any metal truss/structure or placing the fixture(s) on any surface,
a professional equipment installer MUST be consulted to determine if the metal truss/structure or
surface is properly certified to safely hold the combined weight of the fixture(s), clamps, cables, and
accessories.
Maximum ambient operating temperature is 113°F (45°C).
Fixture(s) should be installed away from walking paths, seating areas, or areas where unauthorized
personnel might reach the fixture by hand.
NEVER stand directly below the fixture(s) when rigging, removing, or servicing.
Overhead fixture installation must always be secured with a secondary safety attachment, such as an
appropriately rated safety cable that can hold at least 10 times the weight of the fixture.
Overhead mounting requires extensive experience, including calculating working load limits, knowl-
edge of installation material being used, and perodic safety inspection of all installation material as
well as the unit itself. If you lack these qualifications, do not attempt the installation yourself.
The installaiton should be checked by a skilled person once a year.
10
Advertisement
Table of Contents
