Specifications | Fcc Statement - ADJ FL1300 User Manual

Table of Contents

Advertisement

S P E C I F I C AT I O N S
Light Source:
2x 110W Warm White CREE COB (Chip On Board) LEDs
2,700K Color Temperature (1,200K Tungsten Mode)
50-degree Beam Angle
CRI: 81
12249 LUX @ 1M; 490 LUX @ 5M
50,000 Hour Average LED Life
Features:
Modular design to connect multiple fixtures together in a vertical or horizontal tray from a built-in rail
system on the fixtures
DMX Modes: 6
Dimming Curve Modes: 6
Dimming: 0 - 100% each module
Pixel Control
Strobe Effect
Adjustable LED Refresh Rate (900-25,000Hz)
Adjustable Gamma Brightness (2.0-2.8)
With Wired Digital Communication Network
Connections:
Data Input: 5pin DMX In/Out
Power Input: Locking Power Cable In/Out (with protective rubber caps)
Safety Cable Loop
Control:
RDM (Remote Device Management)
Electrical:
100-240V 50Hz/60Hz (Auto Sensing)
Power Linking: 4 Fixtures @120V | 8 Fixtures @240V
Max Power Consumption: 235W
IPX4 Rated:
X (Protection against Dust) Fixture is not tested for dust ingress. 4 (Protection against Water) Fixture
offers protection from a splash of water in any direction
Dimensions / Weight:
Width: 15.7" (400.0mm)
Height: 8.5" (215.5mm)
Length: 7.9" (200.5mm)
Weight: 15 lbs. (6.8kg)
Approvals / Ratings:
CE Certified
Specifications and improvements in the design of this unit and this manual are subject to change without notice.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Encore burst 200

Table of Contents