Yamaha LS9 Service Manual page 151

7
Enter the password, move the cursor to the
OK button, and press the [ENTER] key.
If the password was incorrect, a message of
"WRONG PASSWORD" will appear in the bottom of
the screen.
Changing the password
Here's how to change the password of the logged-in
user. A change in the Administrator password is updated
immediately. A change in a User password will be
discarded if the user simply logs-out; it must be applied to
the user authentication key before the user logs-out. The
Guest account does not have a password.
1
In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the USER
SETUP screen.
PASSWORD CHANGE popup button
2
Move the cursor to the PASSWORD CHANGE
popup button, and press the [ENTER] key.
A keyboard window will appear, allowing you to enter
the password.
3
Enter the current password, move the cursor
to the OK button, and press the [ENTER] key.
When you enter the correct password, a keyboard
window will appear, allowing you to enter the new
password.
4
Enter the password in the NEW PASSWORD
fi eld; then move the cursor to the OK button
and press the [ENTER] key.
Editing a user authentication key
If you are logged-in as a user, you can edit your custom
fader layer, user-defined keys, and preference settings,
and overwrite (save) them onto your user authentication
key. If you are logged-in as a Power User, you can also
change the user level.
1
Log-in as a user, and edit the custom fader
layer, user-defi ned keys (gp. 155) and pref-
erence settings (gp. 153).
If you are logged-in as a Power User, you can also
change the user level.
2
In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the USER
SETUP screen.
SAVE KEY popup button
LS9-16/LS9-32
151