Important Note Regarding Product Liability - WAGNER FURNO 550 18V Manual

Furno 550 18V

16. Important Note regarding Product Liability!

According to an EU directive, the manufacturer is only liable without limitation for faults
in the product if all parts come from the manufacturer or have been approved by the
manufacturer and have been mounted to the device and are operated properly. If third-
party accessories or spare parts are used, the manufacturer is exonerated wholly or partly
from his/her liability if use of the third-party accessories or spare parts have caused a
defect in the product.
3 + 1 year guarantee on this WAGNER DIY product
In addition to the statutory warranty for this product, J. Wagner GmbH, based in 88677
Markdorf, Germany, grants you a guarantee (device guarantee) of 36 months for this
product. This guarantee is extended by a further 12 months if the product is registered
within 28 days of purchase on the Internet at https://go.wagner-group.com/3plus1.
The guarantee includes the free repair of defects which are demonstrably caused
by the use of unsuitable materials in the product's manufacture or by assembly
errors, as well as the free replacement of faulty components provided there
are no guarantee exclusions.
The statutory material defect rights to which you as the purchaser are entitled for the
intended purpose from the time of handover of the purchased item are not restricted by
the guarantee. The guarantee, along with your statutory warranty rights, will expire if the
device has been opened by persons other than authorised WAGNER service personnel.
The detailed guarantee conditions can be obtained on request from our authorised
WAGNER partners (see website or operating instructions) or in text form on our website:
https://go.wagner-group.com/hf-warranty-conditions
EU Declaration of conformity
We declare under sole responsibility that this product conforms to the following
relevant stipulations:
2014/35/EU, 2014/30/EU, 2011/65/EU, 2012/19/EU
Applied harmonised norms:
EN 60335-1, EN 60335-2-45, EN 60335-2-29, EN 62133-2, EN IEC 55014-1,
EN IEC 55014-2, EN IEC 61000-3-2, EN 61000-3-3,EN 62233
The EU declaration of conformity is enclosed with the product.
If required, it can be re-ordered using order number 2428538 .
- Modifications reserved -
EN
25