Safety Instructions For The Charger And Battery - WAGNER FURNO 550 18V Manual

EN
device. Cleaning and user maintenance must not be carried out by children without
supervision.
• The heat gun and paint become very hot. Wear safety gloves and safety goggles while
working to avoid burns.
• Do not direct the hot air flow towards people or animals.
• Do not use the Heat Gun as a hair dryer.
ATTENTION! When paint is heated, harmful gases and vapours may
develop. Always wear suitable respiratory protection and ensure adequate
ventilation of the work space.
• Old layers of paint may contain lead. Paint containing lead must not be removed
with a heat gun. If in doubt, have the paint checked by an expert.
• Check the power tool before each use. Do not use the electrical tool if it is damaged.
Do not open the electrical tool yourself and only have it repaired by qualified specialist
personnel using original spare parts.
• Keep power tools away from rain or moisture. Water penetrating into a power tool
increases the risk of an electric shock.
• Always remove the battery when you have finished your work.
• Store the heat gun in a dry location out of the reach of children.
• Keep your workplace clean and well lit.
• Do not over-reach, especially when working on ladders.
• Never use to thaw frozen pipes located inside walls or near combustibles.

3. Safety instructions for the charger and battery

Only use the tool with BOSCH POWER FOR ALL compatible PBA 18V
batteries with at least 2.5 Ah and suitable chargers. The battery voltage
must match the battery charging voltage of the charger. Do not charge
non-rechargeable batteries. Otherwise there is a risk of fire and explosion.
•
Only use the charger indoors and keep it away from moisture. Water penetrating
into a power tool increases the risk of an electric shock.
•
Keep the charger clean. There is a risk of electric shock due to contamination.
•
Before every use, check the charger, cable and plug. Do not use the charger if it is
damaged. Do not open the charger yourself and only have it repaired by qualified
specialist personnel using original spare parts. Damaged chargers, cables and plugs
increase the risk of electric shock.
•
Do not operate the charger on easily combustible surfaces (e.g. paper, textiles,
etc.) or in combustible environments. There is a risk of fire due to the heating of the
charger during charging.
•
Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
16
Furno 550 18V