Table of Contents
Advertisement
VERSION 02/2015
SERVICE MANUAL
2
REPAIR WORK
2.1
GENERAL NOTICES
The following points must be noted for every repair carried out on the device:
• Observe the safety instructions in Chapter 4 of the associated operating manual (see
Chapter 1).
• Decommissioning and cleaning as in Chapter 8.1.3 of the operating manual.
• Loosening of the various connections using the appropriate tools (product hoses and
air hoses).
• Defective product hoses may not be repaired, but must instead be replaced as a complete
part for safety reasons.
• After assembly, the repaired components and complete system must be checked in
accordance with Chapter 3.
2.2
REPAIR STAFF
Repair work must be carried out carefully by qualifi ed and trained staff . They should be
informed of specifi c hazards during their training.
The following hazards may arise during repair work:
- Health hazard from inhaling solvent vapors
- Use of unsuitable tools and aids
A skilled person must ensure that the device is checked for being in a reliable state after
repair work is completed.
ORDER NUMBER DOC2355506
GM 1-350/530
5
Advertisement
Table of Contents
