24
The Completing the Add Printer Wizard window will
come up. If all teh data presented is correct, click the
Finisn button. If not, click the <Back button to correct
any errors.
25
Wait for the test print to print. A new dialog will adk for
confirmation of the test print, click Yes.
26
Send a print job to the printer.
27
Check the print job for print quality. If print quality
problems exist, use the print quality section of your
printer System Administrator Guide to correct the
problem.
28
If your print job did not print, see the Troubleshooting
section for your operating system in the Technical
Information Guide to correct the problem.
Windows 2000 Network
Quick Network Install Guide
29