Eu Directives; Ac Mains Supply; Maintenance - Roksan Audio Caspian Set Up Manual And Product Manual

Stereo integrated amplifier
Hide thumbs Also See for Caspian:
Table of Contents

Advertisement

E U D I R E C T I V E S
Roksan declares that the apparatus "Caspian Stereo Integrated Amplifier"
complies with the essential requirements and other relevant provisions of
Directive 1999/5/EC".
NOTE: This product must be earthed. Please ensure that other equipment
connected to it is earthed according to the manufacturer's instructions.
A C M A I N S S U P P L Y
Your Caspian Stereo Integrated Amplifier is set to operate from a fixed supply voltage
which is marked on a label next to the mains input socket. Before connecting the mains
lead please check that your mains supply corresponds to this label as below:
230 V Products
115 V Products
100 V Products
The mains lead supplied with this product has an IEC C13 mains plug which is inserted
into the Mains Input Socket on the unit's rear panel. The other end is a moulded plug
appropriate to that for your country. In the UK this is the standard UK13A plug.
NOTE: Other international markets will require a different value plug and
protection fuses. Please contact us for more details.
This plug should ordinarily not be removed from the lead. If you do remove it,
please dispose of it safely so that it cannot be plugged into a mains socket whilst in
a potentially dangerous condition. If your lead has been damaged please obtain a
complete replacement lead from your dealer.
Should you move to another area where either the mains voltage or the mains plugs
are different from those as supplied with your amplifier, please contact the appointed
Roksan distributor for assistance.
Please observe correct mains polarity at all times.
The amplifier mains fuses are located on the rear panel below the IEC Mains Input
Socket. These must only be replaced by the fuse type and rating as described on the
fuse rating label on the rear panel of the unit.
If the equipment is likely to be unused for some time, unplug it from the mains supply.
M A I N T E N A N C E
After disconnecting the amplifier from the mains supply, the casing and front panel may
be cleaned with a lightly dampened lint-free cloth. Avoid using abrasive substances or
solvents.
2
Voltage Range : 220 - 240 V
Voltage Range: 100 - 120 V
Voltage Range: 90 - 110 V
roksan.com

Advertisement

Table of Contents
loading

Table of Contents