Specifications - Roksan Audio Caspian Set Up Manual And Product Manual

Stereo integrated amplifier
Hide thumbs Also See for Caspian:
Table of Contents

Advertisement

S P E C I F I C A T I O N S
INPUTS
5 Line & Tape gold plated RCA - CD Input also switchable to balanced gold plated XLR
Input Impedance: 47 kΩ
Input Sensitivity (85 W): Line 240 mV
OUTPUTS
Gold plated RCA, Tape & 2 Pre-Amplifier
Output Voltage: 240 mV (Tape Out)
700 mV (Pre-Amplifier Out)
Power Outputs: Loudspeaker, L & R 4mm binding posts
Output Power: 85 Watts, into 8 Ω both channels driven
Output Current: 60 Amps Peak to Peak
Damping Factor: 160 measured at 8 Ω
Frequency Response: -3 dB, <1 Hz – 90 kHz
Gain: 40 dB Overall (Pre & Power)
9.3 dB Pre-amplifier
30.7 dB Power amplifier
Harmonic Distortion: 0.002% 1 kHz, 0.015% 20 kHz 10 W - 8 Ω
0.0025% 1 kHz, 0.03% 20 kHz 50 W - 8 Ω
Signal to Noise Ratio: Line 108 dBa (ref. 500 mV)
POWER SUPPLY
Power Supply: 350 VA Ultra low noise toroidal transformer
60 VA Ultra low noise toroidal transformer preamplifier section
5 Regulated supply rails
Power Source: 100 – 120 V, 50 / 60 Hz
220 – 240 V, 50 / 60 Hz (via Mains inlet filter)
Maximum Power Consumption: 570 W (8Ω)
Dimensions (W x D x H): 432 x 330 x 70 mm
Weight: 13 Kg
All specifications are liable to change without notice. E&OE
14
85 dBa (ref. 1 W, 8Ω)
432 x 330 x 80 mm (including feet)
roksan.com

Advertisement

Table of Contents
loading

Table of Contents