Unpacking; Eu Directives; Ac Mains Supply - Roksan Audio K3 Set Up Manual And Product Manual

Stereo integrated amplifier
Hide thumbs Also See for K3:
Table of Contents

Advertisement

U N P A C K I N G
Included in the packing of your K3 Integrated Amplifier you will find:
One mains lead fitted with the correct mains power plug for your country.
One Roksan R7 Remote Control and CR2032 battery
One information pack.
After removing these items please retain all packing material. Correct packing is
necessary for future transportation of your K3 Integrated Amplifier.
E U D I R E C T I V E S
Roksan declares that the apparatus "K3 Integrated Amplifier" complies
with the essential requirements and other relevant provisions of Directive
2014/53/EU.
A C M A I N S S U P P L Y
Your K3 Integrated Amplifier is set to operate from a fixed supply voltage which is
marked on a label next to the mains input socket. Before connecting the mains lead
please check that your mains supply corresponds to this label as below:
230 V Products
115 V Products
100 V Products
The mains lead supplied with this product has an IEC C13 mains plug which is inserted
into the Mains Input Socket on the unit's rear panel. The other end is a moulded plug
appropriate to that for your country. In the UK this is the standard UK13A plug.
NOTE: Other international markets will require a different value plug and
protection fuses. Please contact us for more details.
This plug should ordinarily not be removed from the lead. If you do remove it,
please dispose of it safely so that it cannot be plugged into a mains socket whilst in
a potentially dangerous condition. If your lead has been damaged please obtain a
complete replacement lead from your dealer.
Should you move to another area where either the mains voltage or the mains plugs
are different from those as supplied with your amplifier, please contact the appointed
Roksan distributor for assistance.
Please observe correct mains polarity at all times.
The amplifier mains fuse is located on the rear panel below the AC Mains Input Socket.
This must only be replaced by the fuse type and rating as described on the fuse rating
label on the rear panel of the unit.
This product requires connection to earth (ground). The earth wire (in the UK this
is colour coded GREEN/yellow) of the mains cable supplied with your Integrated
Amplifier must be connected to a suitable earthing point established for this purpose by
your electricity supply company. If you are in any doubt, consult a qualified electrician.
If the equipment is likely to be unused for some time, unplug it from the mains supply.
2
Voltage Range : 220 - 240 V
Voltage Range: 100 - 120 V
Voltage Range: 90 - 110 V
roksan.com

Advertisement

Table of Contents
loading

Table of Contents