Directives; Ac Mains Supply; Maintenance; Location - Roksan Audio Attessa Owner's Manual

Directives

Monitor Audio Group declares that the apparatus "Attessa Streaming Amplifier" and "Attessa
Integrated Amplifier" in conformity with the essential requirements and other relevant
provisions of Directive 2014/53/EU ".
NOTE: This product must be earthed. Please ensure that other equipment connected to it is earthed
according to the manufacturer's instructions.
Monitor Audio Group declare in own responsibility, that the Monitor Audio products described in
this manual is in compliance with the following Standards and is in conformity with the essential
requirements of the Radio Equipment Regulations 2017.

AC Mains Supply

Your Attessa Streaming or Integrated Amplifier is set to operate from a fixed supply voltage which is marked
on a label next to the mains input plug. The mains lead supplied with this product has an IEC C13 mains
plug which is inserted into the Mains Input Socket on the unit's rear panel. The other end is a moulded plug
appropriate to that for your country.
If your lead has been damaged please obtain a complete replacement lead from your dealer.
Should you move to another area where either the mains voltage or the mains plugs are different from
those as supplied with your product, please contact the appointed Roksan distributor for assistance.
Please observe correct mains polarity at all times.
The mains fuses are located on the rear panel below the IEC Mains Input Socket. These must only be
replaced by the fuse type and rating as described on the fuse rating label on the rear panel of the unit.
If the equipment is likely to be unused for some time, unplug it from the mains supply.
NOTE: This unit contains no user serviceable parts. Do not remove any panels or attempt to service it
yourself. Unauthorised servicing will void the warranty.

Maintenance

After disconnecting the product from the mains supply, the casing and front panel may be cleaned with
a lightly dampened lint-free cloth. Furniture polish can also be used to clean the Streaming/ Integrated
Amplifier. Avoid using abrasive substances or solvents.

Location

Your Streaming/ Integrated Amplifier should be located in a well ventilated area and kept away from
sources of heat, dust, humidity and direct sunlight.
The Streaming/ Integrated Amplifier may be positioned either as a free standing unit or alongside other
audio/video product(s). Never place the Streaming/ Integrated Amplifier under other electronic equipment,
carpet or any surface likely to hinder normal ventilation. Never allow liquids or other objects to fall into the
unit.
When purchased with an Attessa CD Transport, we recommend placing the CD Transport below the
Integrated/ Streaming Amplifier.
2 roksan.com