Advertisement
How to Correct a Mismatch
When you get a mismatch, the machine displays a Verify (V)
error on the status line and also displays the entire record.
1.
Press RESET.
2.
Key in the correct character.
Changes made to the record are updated on the disk after you
finish verifying the record and advance to the next record.
Note:
A character is accepted only if keyed twice in succes-
sion or if it matches the original character.
If Several Characters or an Entire Field Is Incorrect:
1.
Press FIELD COR (cursor goes to the first position of
the current field and the machine mode changes to C).
2.
Key in the correct field (as if in Enter mode). When
completed, the cursor returns to the first position of
the current field.
3.
Rekey the field you have just keyed to verify it.
NQte:
This is the way you would normally correct a right-
adjust Verify error.
When Extra Records Have Been Keyed:
If you have an extra record, simply delete it by pressing
FUNCT SEL lower and DELETE REC.
75
Advertisement
