Advertisement
•
If using a 5496 Data Recorder and the feed check
light indicates a transport jam:
A.
Switch TERMINAL to MANUAL.
B.
Press REL.
c.
Remove jammed cards from the transport
manually.
D.
Press DUP until a card is punched.
How to Get an Unformatted Data Set Punchout
1.
Insert the diskette in disk drive 1.
2.
Press REC ADV (if necessary) to advance to the data
set label for the data set to be punched.
3.
Switch AUTO REC ADV to ON (for continuous
punching).
142
4.
Press FUNCT SEL upper and PUNCH TO EOD. The
entire data set is punched, one record per card.
Note: When punching an unformatted card record, you
cannot have a card read/punch program in program level A.
Also, program level 9 is used as an input/output buffer and
cannot be used for card read/punch programs.
To Stop Punching
Turn AUTO REC ADV to OFF. The punching stops
at the end of the punch cycle.
Advertisement
