Advertisement
Code
Type
c
Line Check
(cont.)
D
Disk 2 Not Ready
Disk Full
Inquiry Error
Mode
COMM
1
ALL
E
COMM
1
COMM
1
Causes
• The line or remote station
ma !functioned.
• The Disk 2 drive isn't ready.
• Removed Disk 2 while doing a Disk
Copy operation.
• If receiving: You have written a
record into the last available disk
location or else there are no more
valid data set labels available.
If transmitting: The last data set
to be transmitted indicates a con-
tinued data set.
• The last received response was
written in position 73026 of disk
1 or the responses overflowed onto
disk 2.
1
COMM identifies errors that occur during communications; see Communications.
What You Do
Try to re-establish the connection. (If
you are in Auto Answer mode, you don't
have to do anything.)
Reset, press FUNCT SEL upper and
DISK 2 REC ADV.
Insert the diskette, hold down NUM
SHIFT, and press RESET.
Receiving: Insert another diskette and
re-establish conrrection at the appropri-
ate place.
Transmitting: Insert the next diskette
and re-establish the connection. You
must inform the remote location of
what you are doing.
Use another disk to continue. Restart
communications at the appropriate
place.
231
Advertisement
