Advertisement
Entering Data Under Control Of An Existing
Program (continued)
7.
8.
Wait for the machine to display X R in the status line;
then remove the program diskette.
Insert another diskette (displays the sector 08 data
set label).
9.
Set AUTO REC ADV and AUTO OUP/SKIP switches
to OFF.
10.
Set the PROG NUM SH I FT switch to ALL CHAR.
Note:
When this switch is set to ALL CHAR, all upper
shift characters will be accepted in numeric fields.
11.
Press FUNCT SEL lower and ENTER.
12.
Press SEL PROG.
13.
Key in a 1, 2, 3, 4, 5, 6, 7, 8, 9, or A (storage
area number where you stored your program).
14.
Key in the first record from the source document.
Then set the AUTO REC ADV and AUTO DUP/SKIP
switches to ON.
15.
Press FUNCT SEL lower and RETURN TO INDEX
after entering all the records (machine returns to the
index track and displays the data set label).
16.
Wait for the machine to display X Hin the status line;
then remove the diskette.
59
Advertisement
