Advertisement
246
Code
Type
Mode
Causes
What You Do
U4
Printer and
p
•
(3715 Printer only.) Both a printer
Press RESET to exit the printer mode
Disk Error
hardware error and a disk read error
and then press RESET again to clear
occurred at the same time.
the disk error.
v
Verify
v
•
A mismatch occurred between the
Reset and key the correct character.
Mismatch
current data keystroke and the data
character in the record.
v
•
A non-blank character was found
Reset and correct the character .
during a skip operation or during
a record advance operation in a fol-
lowing manual or skip field.
v
•
A mismatch occurred between the
Reset and correct the character.
characters in the current record and
the corresponding character in the
previous record in a duplicate opera-
ti on.
Received
COMM
1
•
The remote location wants to send
Select Receive mode (R) and re-establish
Line Bid
data but the 3741 isn't ready to re-
the connection.
ceive it.
1
COMM identifies errors that occur during communications; see Communications.
Advertisement
