Decurler Paper Path - Xerox DocuColor 5000 Administrator's Manual

1. D ec u r l e r A d j us t me n t

Decurler paper path

1- 2
With some print jobs, the output prints still may be curled more
than you desire even after using the Decurler A-D Settings. In
those cases, use the Custom Decurler Profile feature to
compensate for paper curl in your prints. Custom Decurler Profile
settings are based on job type and image density ratio. These
settings are manually entered.
IMPORTANT! If a Decurler profile is changed, it remains at that
setting until changed again manually. As an example, if you decide
to use the B Decurler setting, the setting will remain at B until you
change it to another setting.
NOTE: It is important to remember that a successful Decurler
setting used today may not be the same setting that you would
use on another day for that same file. This is especially relevant if
the room in which printer is located experiences changes in
temperature and humidity.
The Decurler has both upper and lower adjustment arms that
apply pressure to the paper based on system defaults, selections
made on the Tray Properties screen (A-D settings), or based on
entries made on the Decurler Profile screen. The degree of
pressure is applied independently to the upward and downward
Decurler arms.
D o c uC o lo r 50 0 0 A d mi n i s tr a to r G ui d e