Custom Decurler Profiles - Xerox DocuColor 5000 Administrator's Manual

1. D ec u r l e r A d j us t me n t

Custom Decurler Profiles

Carousel Horses
Image Density Ratio per Color Image Density Ratio per Color Image Density Ratio per Color
Black 30.5%
Magenta 28.1%
Cyan 23.8%
Yellow 29.5%
1- 8
While the system is programmed to correct for curl under most
conditions, there may be instances where the pre programmed
settings (System Default and A-D) may not meet your curl
requirements. Using Custom Decurler Profiles allows you to enter
an image density ratio range to help eliminate curl. Custom
Decurler Profiles are based on image density ratio and humidity
values, only.
NOTE: The examples that follow are designed to give you an
understanding of programming the Custom Decurler Profile option
to obtain optimal results, but due to various job stock and
environmental conditions the manner in which you achieve the
best results may vary.
The most important aspect for creating a Custom Decurler Profile
is determining the image density ratio on the curled paper. A
sampling of image density ratio on some typical customer
documents follows.
NOTE: The following image density ratios have been measured
using the particular application's tools which created them. If you
do not have access to an application's tools, which measure
image density ratios, make your estimate using the following
examples as a guide. Your estimates will be used when entering
Custom Decurler Profile values, which is explained later in this
section.
Image Density Ratio examples
Bolivar Ltd.
Black 5.4%
Magenta 4.3%
Cyan 6.0%
Yellow 6.7%
Dunn Report
Black 10.8%
Magenta 8.5%
Cyan 8.5%
Yellow 7.2%
D o c uC o lo r 50 0 0 A d mi n i s tr a to r G ui d e