Entering Values In The Custom Decurler Profile Fields - Xerox DocuColor 5000 Administrator's Manual

Entering values in the Custom Decurler Profile fields

D o c u C o lo r 50 0 0 A dm i ni s t r at o r G u i de
IMPORTANT! It is important to understand that when entering
image density ratio values within the Decurler Profile Properties
window that the maximum allowed entry is 100%.
When determining what values to enter, do not total all CMYK
image density ratios, but instead determine the largest CMYK
image density ratio value. Take a look at the following examples
for further explanation:
• If your job contains image density ratios of 100% cyan, 100%
magenta, 100% yellow, and 100% black, the maximum image
density ratio value is 100%. If your job contains 100% cyan,
20% magenta, 20% yellow, and 20% black, the maximum
value is still 100%.
• If your job contains image density ratios of 50% cyan, 50%
magenta, 50% yellow, and 50% black, the maximum image
density ratio value is 50%. If your job contains 50% cyan, 10%
magenta, 10% yellow, and 10% black, the maximum value is
still 50%.
• Consider the Carousel Horses image density ratios shown
below. When entering image density ratio values to control
curl, you will use the black 30.5% value, not the combined total
of all CMYK values.
Image Density Ratios
Black
Magenta
Cyan
Yellow
1. De c u r l er A dj u s tm en t
Carousel Horses
30.5%
28.1%
23.8%
29.5%
1-11