Xerox DocuColor 2045 Administration Manual page 53

Tools mode
Hide thumbs Also See for DocuColor 2045:
Table of Contents

Advertisement

T
M
O O L S
O D E
NOTE:The button for Tray 4 does not appear unless you have this optional
accessory connected to your DocuColor 2060/2045.
7
Use the up or down arrow buttons to enter the amount of adjustment for either
edge or both edges.
KEY POINT: Remember that the Lead Edge Registration adjustment is the
feeding edge, or Y direction. The Side Edge Registration adjustment is the front
to back, or X, direction.
KEY POINT: If the reference point on side two is closer to the edge of the
paper compared to the reference point on side one, enter a plus figure. If the
reference point on side two is further from the edge of the paper compared to
side one, enter a minus figure.
KEY POINT: EXAMPLE: If the measurement is 1.2mm closer to the edge of
the paper, enter +1.2mm.
D
C
2 0 6 0 / 2 0 4 5 S
A
G
1–53
O C U
O L O R
Y S T E M
D M I N I S T R A T I O N
U I D E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucolor 2060

Table of Contents