Xerox DocuColor 2045 Administration Manual page 102

T M
O O L S O D E
1 – 10 2
To set the defaults for Side 2, touch the Side 2 button. Then, touch the Side
2 Mirror or Side 2 Independent button. The popup screen allows you to
specify the amount of image shift for the Side 2 Independent selection only.
Selecting Side 2 Mirror will have the system use the same amount of shift
selected for Side 1.
Figure 82. Image Shift screen with Margin Shift and
Left/Right buttons selected
Figure 83. Image Shift screen with Margin Shift and
Top/Bottom buttons selected
• If you selected the Unrestricted Shift button, select Side 1 or Side 2.
Then use the horizontal arrow buttons to specify the amount of the image
shift from Left to Right. To specify the amount of the image shift from Top to
Bottom, use the vertical arrow buttons. Repeat for the other side, if required.
D C 2 0 6 0 / 2 0 4 5 S
O C U O L O R
A
Y S T E M D M I N I S T R A T I O N
G
U I D E