T
M
O O L S
O D E
Navigating in Tools Mode
Machine Defaults and Feature Defaults
D
C
2 0 6 0 / 2 0 4 5 S
O C U
O L O R
The following table provides tells you how to navigate in Tools Mode by pressing
or touching keys or buttons.
Key or Button
Tabs
Enter
System Default
Close
Off
Reset
Cancel
Exit Tools
NOTE: Changes made to features in the Tools Mode take effect when you exit
Tools Mode.
The Machine Defaults 1 screen appears when you first enter the Tools Mode.
You can change the default settings for the options shown on the Machine
Defaults 1, Machine Defaults 2, Feature Defaults 1, and Feature Defaults 2
screens. The Feature Defaults 2 screen is accessed by touching the More... tab.
NOTE:The Machine Defaults 3 screen is discussed later in this chapter.
A
Y S T E M
D M I N I S T R A T I O N
Result
Allows you to view the options available on that screen.
Saves any changes you made on the screen.
Returns the settings on the screen to the factory default
settings.
Closes the screen and returns the system to the previous
screen.
Deactivates the feature.
Returns the settings on the screen to the settings that
were in effect when the screen opened.
Cancels the changes made on the screen.
Exits the Tools Mode.
G
U I D E
1–5