Skyrc S100 neo Instruction Manual page 27

Voltage
Current
DC Power
Start
Back
Battery
N/A
Meter
Factory
N/A
Settings
System
N/A
Info
Regulatory N/A
Back N/A
Set the output voltage. (2.0-30.0V)
Set the output current. (1.0-10.0A)
Enable DC power output and return to the main interface.
Back to the previous interface.
Measure the battery voltage and internal resistance.
Press - to return to the system setting.
Restore to the factory settings.
Check the current system status.
Check the certification information
Back to the previous interface.
SKYRC S100neo Instruction Manual
25. SKYRC S100neo