Guide to Performing Routine Maintenance
1
2
1. Dry ink bottle
2. Latch
4. Pull the empty dry ink bottle toward you until it stops.
5. Remove the empty bottle and discard it.
6. Shake the new ink bottle at least ten rotations, taking care to
support the bottle cap. It is important that you mix the
contents thoroughly by allowing the material inside the bottle
to fall and settle toward the cap at each rotation.
7. Insert the new bottle into the printer until it is latched into
place. The cap will remain in the front of the compartment as
you push the bottle toward the back.
Inks
5-3