Feeder trays
1-4
Attempting to move the lever in any other direction can break it.
3. Press the green lever down to unlatch the paper feeder
assembly.
4. Pull out any partially fed paper from the feeder assembly and
discard it. There will be some resistance.
5. Squeeze the lever against the back of the length guide and
slide the guide toward the back of the printer.
6. Remove any paper remaining in the tray and set it aside to be
placed on top of the new paper.
7. Load paper, following the instructions at the front of the
feeder tray and carefully positioning the paper in the right-
front corner of the tray.
CAUTION
Guide to Performing Routine Maintenance