Loading Feeder Trays; Guidelines For Loading Paper; Loading The Trays - Xerox 4050 Maintenance Manual

Feeder trays

Loading feeder trays

Guidelines for loading paper

Loading the trays

1-2
• The printer does not feed all the paper out of a tray. A stack of
approximately 1/4 inch / 6 mm remains in the tray.
It is important to load paper properly in the feeder trays to
prevent jams and loss of production time. The following
guidelines will help ensure maximum efficiency of your printer
operation.
When you are loading the paper, follow these guidelines to
prevent paper jams:
• Remove damaged sheets.
• Load the paper with the package wrapper seam side up.
• Make sure that the direction of the curl is consistent.
• Avoid fanning the paper unless the stock is predrilled.
• Do not load the paper above the MAX line on the length
guide.
• Place any paper left in the bottom of the tray on top of the
new paper stack.
• When loading predrilled paper, fan the paper and remove
loose paper plugs.
Follow these steps to load a feeder tray:
1. If the Ready To Open indicator light on the feeder tray door is
not lit, press the Tray Unlock button and wait for the tray to
descend and the Ready To Open indicator light to lit before
opening the tray.
Guide to Performing Routine Maintenance