Advertisement
RUA 5308X, RUA 6508X, RUA 8508X
2. Insert the mounting frame into the prepared opening in the outer wall (see chapter "Making a gas outlet open-
ing" on page 14) and screw the mounting frame to the mounting holes (fig. d 1).
3. Insert the hood and screw it tight (fig. d 2).
6.7 Installing the flue duct
I
NOTE
• Use the gas flue kit 3776 (accessories).
• Do not install additional flue ducts, as this leads to poor performance and increases
the power consumption of the refrigerator.
• Trim the flue pipe to the desired length if the flue pipe protrudes too far from the
vehicle when installed.
• If an exhaust extension is used, ensure that the exhaust extension:
– has no more than 2 bends,
– has a minimum slope of 35 degrees above horizontal,
– is as short as possible,
– is designed to prevent leaks, and
– is made of suitable materials in accordance with AS/NZS 5601.2.
e
1
10
9
EN
2
3
4
5
6
7
8
Installation
6
17
Advertisement
