Respekta KG176W-37 Installation & Operating Instructions Manual page 61

Heat dissipation space
During operation, the refrigerator emits heat into the surrounding environment. Therefore, it is important
to leave at least 30 mm of clearance at the top, 100 mm at both sides and more than 50 mm at the rear
of the appliance.
W (mm) D (mm)
540 550
WARNING: Do not cover the ventilation outlets/grilles of the appliance.
NOTE: The figure shown here is designed to illustrate the appliance dimensions
schematically.
Supporting surface
Install the refrigerator on a solid and flat floor surface to keep it stable, otherwise it may be subject
to vibration and noise. If the refrigerator is standing on flooring materials such as carpet, mats, or
polyurethane, interpose solid supports/boards under the appliance to prevent deterioration of the
aforementioned flooring materials due to heat dissipation.
Levelling
Stabilise the refrigerator by means of the front levelling feet (height adjustable). If the refrigerator is not
correctly stabilised, the door seals may become distorted, thus preventing the appliance from working
correctly. In addition, the appliance may vibrate anomalously. After having positioned the refrigerator,
wait at least 4 hours before using it, to allow the refrigerant to settle.
en-26
H (mm) A (mm)
1760 910
B (mm) C (°)
1055 130±5
Fig. 5.1
E (mm) F (mm)
50 100