Remove the washer and nut securing pin (F) to bottom
hinge (E).
Remove pin (F).
Insert pin (F) into the LH hole of bottom hinge (E).
Fix pin (F) with the washer and nut.
Install bottom hinge (E) on the LH of the refrigerator.
Remove the screw that secures door stop (G) located at
the bottom right of freezer door (H), then remove stop
(G) and install it on the left lower side of freezer door (H).
Install freezer door (H).
NOTE: Make sure the door is perfectly
aligned with the base of he refrigerator and
that the rubber seal is perfectly airtight.
Move bushing (I) from the top RH side to the top LH side
of freezer door (H).
Move blanking plug (L) from the LH hole to the RH one.
en-28
E E
E E
H H
G G
I I
F F
Fig. 5.5
F F
Fig. 5.6
Fig. 5.7
L L
H H
Fig. 5.8