4
Click Bi-Directional Setup.... The Bi-Directional Communication dialog opens.
5
Enter the Device Name or TCP/IP address.
6
Select Enable Bi-Directional Communication.
7
Click OK. Bi-Directional communication is enabled. A Status button appears on the Paper/Output
tab of the printer driver. By clicking Status, you can access current information about the printer.
See About Bi-Directional Printer Drivers on page 2-23.
N
:
To change the SNMP Community Name, click SNMP Community Name. The printer
OTE
name must be changed to match this name for Bi-Directional communication to be available.
2-20
Figure 2-2: Bi-Directional Communication Dialog
Installing Windows Printer Drivers