Creating Tab Masters - Xerox WorkCentre 7655 Supplementary Manual

Page 6 of 22
WorkCentre 7655/7665 Tab Creation Supplement

Creating Tab Masters

Your document must contain a page with the text you want
printed on the tab for each tab divider in the set. These are
called the tab master pages and are the same size as the
body of your document, either 8.5x11 inches or A4. The
pages must be inserted in the correct place in your
document. To create the tab master pages you can either
use the Xerox Tab Template or create your own tab master
pages.
Using Xerox Tab Master Templates
1. Xerox provides templates for 5 position tab masters for
A4 or 8.5x11 inch documents in Microsoft Word. The
templates can be downloaded from
- Search on 'Tab Template'.
- Select 'Templates for Laser Printers'
2. Open the template you require, save it as another file and
change the text on the tabs as required.
3. If you are making the tab masters for a copy job, print the
tab master pages onto plain stock either 8.5x11 inches or
A4 and insert the prints into the appropriate places in
your original document.
4. If you are creating tab masters for a print job, cut and
paste the tab master pages into the appropriate places in
your document.
5. You are now ready to copy or print your job.
http://www.xerox.com