Xerox WorkCentre 7655 Supplementary Manual page 12

NOTE
Page 12 of 22
WorkCentre 7655/7665 Tab Creation Supplement
16. Select End Job and Print. The job will be compiled and
one sample set will be printed.
17. If the sample set is OK, select the Job Status button on
the control panel, locate the job in the job queue and
select Release.
18. When printing is complete select the Clear All button to
reset the machine to the default settings.
In the unlikely event of a paper jam occurring, follow the
instructions on the screen and remove any partially used
sets of tab stock from the paper tray.