Xerox WorkCentre 7655 Supplementary Manual page 13

WorkCentre 7655/7665 Tab Creation Supplement
4. Printing Onto Tabs
This chapter describes how to add tab stock (either imaged
or blank) to a printed document.
Setup
Refer to the Section 2, and:
1. Load the tab stock into the Bypass Tray.
2. Create your tab master pages.
4a. Printing a Document with Printed Tab
Dividers
NOTE Both PostScript and PCL print drivers can be used to print
onto tab dividers.
1. With your document open, select File > Print.
2. Select your WorkCentre 7655/7665 print driver.
3. Select Properties. The Document Properties screen will
appear.
4. Select the Special Pages tab.
Page 13 of 22