Supermicro 2027R-E1CR24L User Manual page 54

S S S
UPER TORAGE
Warning: You can only install the CPU to the socket in one direction. Make sure that
the CPU is properly inserted into the socket before closing the load plate. If it doesn't
close properly, do not force it as it may damage your CPU. Instead, open the load
plate again and double-check that the CPU is aligned properly.
7. With the CPU in the socket, in-
spect the four corners of the CPU
to make sure that they are flush
with the socket.
8. Close the load plate. Lock the
lever labeled 'Close 1st', then lock
the lever labeled 'Open 1st'. Use
your thumb to gently push the
load levers down until the lever
locks.
YSTEM 2027R-E1CR24L User's Manual
Gently close
the load plate.
Push down and lock the
level labeled 'Close 1st'.
Lever Lock
5-6
Push down
and lock the
lever labeled
'Open 1st'.