HRS DF63-1618PCFA Quick Start Manual

Crimp condition table

Advertisement

圧着条件表
当社の圧着端子に圧着使用される指定の電線は所定の圧着性能を得る為に、圧着品質基準書を満たすよう作業を実施し、クリンプハイトを次ページの通りに設定し管理願います。
Please control the crimp conditions shown next page for securing the specified performance. Please also do crimping based on the crimp quality standards.
■注意事項
1. クリンプハイト設定値を外れた場合は品質上の重大な事故となる可能性が有ります。クリンプハイトは品質を決める重要な要点の一つです。
2. クリンプハイトの調整方法及び測定方法は,取扱説明書を参照して下さい。
なお、被覆側のクリンプハイトは、電線メーカー、ロットの違い等により特定出来ない場合が有ります。
3. 弊社では,芯線側クリンプハイトの最適値を精度よく設定する為に電線毎に試験を実施してクリンプハイトの設定をする事を原則としています。
上記以外の新たな電線のクリンプハイトの設定値につきましては、弊社営業本部までご連絡下さい。
4. 本圧着条件表は、弊社純正アプリケータを使用した場合に限り適用します。
5. 圧着条件は予告なく追加される場合があります。
6. UL File No.が同じ、かつ芯線構成・芯線めっきが同等の電線については、メーカー名によらず同等の圧着条件で圧着可能です。
■Notice
Controlling the crimp height is an important task to decide the quality of the crimping.
1.
It may lead to a serious quality problem if the crimp height is not properly established.
Please refer to an instruction manual for the method of adjustment and measurement of the crimp height.
2.
The crimp height shown on the wire insulators will, in many case,
be for reference only as they will differ per each cable manufacturer and the production volume.
3.
Hirose's internal rule is to establish a crimp height by performing a crimp testing on every wire in order to provide a precise crimp height strictly.
As such, it is recommended that our sales representative are consulted, if any other wires are to be used besides these.
4.
The crimp condition table is applied only if the tool specified by Hirose is used.
5.
The crimp condition table is subject to be added without notice.
6. The wire which UL File No., its conductor construction and conductor plating are same can be crimped with same crimp condtion
even if the wire manufacturer is different.
■特記事項 / Other items of note
文書番号
Document No.
Approved
SJ.OKAMURA
Checked
SZ.ONO
Charged
HK.HAYASHI
Drawn
HK.HAYASHI
ヒロセ電機株式会社
Hirose Electric Co., Ltd.
ETAD-H1057-00
Rev.
20231227
Dis No.
Charged
20231227
20231227
Checked
Date
20231227
0
1/2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DF63-1618PCFA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HRS DF63-1618PCFA

  • Page 1 文書番号 ETAD-H1057-00 Document No. Rev. 圧着条件表 Approved SJ.OKAMURA 20231227 Dis No. Crimp Condition Table Charged Checked SZ.ONO 20231227 Charged HK.HAYASHI 20231227 Checked Date Drawn HK.HAYASHI 20231227 当社の圧着端子に圧着使用される指定の電線は所定の圧着性能を得る為に、圧着品質基準書を満たすよう作業を実施し、クリンプハイトを次ページの通りに設定し管理願います。 Please control the crimp conditions shown next page for securing the specified performance. Please also do crimping based on the crimp quality standards. ■注意事項...
  • Page 2 圧着条件表 Crimp Condition Table 適用圧着端子 文書番号 ETAD-H1057-00 Rev. Applicable Crimp Contact 圧着品質基準書 Dis No. Approved SJ.OKAMURA 20231227 Applicable Crimp Quality Standards 製品名 HRS No. Checked SZ.ONO 20231227 Charged Product name Charged HK.HAYASHI 20231227 Checked 680-0636-0 00 DF63-1618PCFA ETAD-H0810-00 Date Drawn HK.HAYASHI...

Table of Contents