List Of Error Messages - Xerox 6204 User Manual

4.1

List of Error Messages

The following table shows error messages possibly displayed during the operation of
BT-PlotAssistant and their meaning, and how to resolve the errors.
Error message
Select copies from 1 to 99.
Printer name is not selected.
Select printer.
S a m e e x t e n s i o n h a s b e e n
registered already. Unable to
register.
Same owner name has been
registered already. Unable to
register.
Same printer name has been
registered already. Unable to
register.
File XXX copies are out of
range. Enter value from 1 to 99.
File XXX format is unknown.
Select format.
Invalid printer number. Specify
number from 0 to 99.
Pen width setting is out of
range. Enter value from XX to
XX.
Job setting file is corrupted.
Unable to set a job.
Cannot find the specified file.
Printing is halted.
26 Chapter 4 Error Messages
Meaning
Number of copies is out of range.
No printer was registered in
[Printer name] when you send
print command.
S a m e e x t e n s i o n h a d b e e n
registered when you tried to
register an extension.
Same owne r name had been
registered when you tried to
register a owner name.
Same printer name had been
registered when you tried to
register a printer name.
Number of copies for file XXX is
out of range.
File XXX format is unknown.
Printer number is out of range.
Pen width setting value is out of
range.
Job setting file is corrupted.
Cannot find job setting file in
specified location.
How to resolve
Correct the number of copies from
1 to 99.
Register printer name or IP address
from [Printer name] of [Option].
Change extension name.
It is required to register unique
extension for automatic data format
recognition.
Change owner name.
Change printer name.
Correct number of copies for file
XXX from 1 to 99.
Specify the format for file XXX.
Specify printer number from 0 to
99.
Enter pen width setting value within
limits.
Delete the corrupted job setting file
and create new one.
Job setting file might have been
moved, or deleted. Bring back the
job setting file to original place, or
create new one.