Integrated Peripherals; Onchip Ide Channel0/1; Ide Prefetch Mode; Ide Hdd Block Mode - TMC MI5VMT User Manual

Mvp4 micro atx motherboard
Table of Contents

Advertisement

Chapter 6 BIOS Configuration

6.10 Integrated Peripherals

This option sets your hard disk configuration, mode and port.
On-Chip IDE Channel 0
On-Chip IDE Channel 1

IDE Prefetch Mode

IDE HDD Block Mode

Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART 2 Mode

OnChip IDE Channel0/1

The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select Enabled to activate each channel
separately.
IDE Prefetch Mode
This field allows your hard disk controller to use prefetch mode to
transfer data to increase the performance.
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.

Primary/Secondary Master/Slave PIO

These fields allow your system hard disk controller to work faster.
Rather than have the BIOS issue a series of commands that transfer to
or from the disk drive, PIO (Programmed Input/Output) allows the
BIOS to communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4,
which primarily differ in timing. When Auto is selected, the BIOS will
select the best available mode.
56
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALSP
AWARD SOFTWARE INC.
: Enabled
Onboard Parallel Port
: Enabled
Parallel Port Mode
: Disabed
: Enabled
: Auto
: Auto
Onboard legacy Audio
: Auto
Sound Blaster
: Auto
SB I/O Base Address
: Auto
SB IRQ Select
: Auto
SB DMA Select
: Auto
MPU-401
: Auto
MPU-401 I/O Address
Game Port (200-270H)
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
Parallel Port Mode
: Standard
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: 378/IRQ7
: Normal
: Enabled
: Enabled
: 220H
: IRQ 5
: DMA 1
: Enabled
: 330-333H
: Enabled
: Normal
PU/PD/+/- : Modify
(Shift) F2 : Color
MI5VMT User's Manual

Advertisement

Table of Contents
loading

Table of Contents