Integrated Peripherals; Onchip Ide Channel0/1; Ide Prefetch Mode; Ide Hdd Block Mode - TMC MI5VP4 User Manual

Chapter 6 BIOS Configuration

6.10 Integrated Peripherals

This option sets your hard disk configuration, mode and port.
INTEGRATED PERIPHERALSP
On-Chip IDE Channel 0 : Enabled
On-Chip IDE Channel 1 : Enabled

IDE Prefetch Mode

: Disabed

IDE HDD Block Mode

: Enabled
Primary Master PIO : Auto
Primary Slave PIO : Auto
Secondary Master PIO : Auto
Secondary Slave PIO : Auto
Primary Master UDMA : Auto
Primary Slave UDMA : Auto
Secondary Master UDMA : Auto
Secondary Slave UDMA : Auto
Onboard FDD Controller : Enabled
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
UART 2 Mode : Standard

OnChip IDE Channel0/1

The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select Enabled to activate each channel
separately.
IDE Prefetch Mode
This field allows your hard disk controller to use prefetch mode to
transfer data to increase the performance.
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.

Primary/Secondary Master/Slave PIO

These fields allow your system hard disk controller to work faster. Rather
than have the BIOS issue a series of commands that transfer to or from
the disk drive, PIO (Programmed Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.
54
ROM PCI/ISA BIOS
AWARD SOFTWARE INC.
Onboard Parallel Port
Parallel Port Mode
Onboard legacy Audio
Sound Blaster
SB I/O Base Address
SB IRQ Select
SB DMA Select
MPU-401
MPU-401 I/O Address
FM Port (388-38BH)
Game Port (200-270H)
Parallel Port Mode : Normal
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
MI5VP4 User's Manual
: 378/IRQ7
: Normal
: Enabled
: Enabled
: 220H
: IRQ 5
: DMA 1
: Enabled
: 330-333H
: Enabled
: Enabled
PU/PD/+/- : Modify
(Shift) F2 : Color