Pnp/Pci Configuration; Pnp Os Installed; Resources Controlled By; Reset Configuration Data - TMC MI5VMT User Manual

Mvp4 micro atx motherboard

Hide thumbs

Table of Contents

Chapter 6 BIOS Configuration

6.7 PNP/PCI Configuration

This option configures the PCI bus system. All PCI bus systems on the

system use INT#, thus all installed PCI cards must be set to this value.

PNP OS Installed

Resources Controlled by

Reset Configuration Data

IRQ-3

assigned to

IRQ-4

assigned to

IRQ-5

assigned to

IRQ-7

assigned to

IRQ-9

assigned to

IRQ-10 assigned to

IRQ-11 assigned to

IRQ-12 assigned to

IRQ-14 assigned to

IRQ-15 assigned to

DMA-0 assigned to

DMA-1 assigned to

DMA-3 assigned to

DMA-5 assigned to

DMA-6 assigned to

DMA-7 assigned to

PNP OS Installed

This field allows you to specify if the operating system installed in

your system is plug and play aware.

NOTE: Operating systems such as DOS, OS/2, and Windows 3.x do

not

Resources Controlled by

This PnP BIOS can configure all of the boot and compatible devices

automatically. However, this capability needs you to use a PnP

operating system such as Windows 95. The default value is Manual.

Reset Configuration Data

This field allows you to determine whether to reset the configuration

data or not. The default value is Disabled.

IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to

These fields allow you to determine the IRQ/DMA assigned to the ISA

bus and is not available to any PCI slot.

ROM PCI/ISA BIOS