Cmyk Simulation Method; Output Profile - Xerox DocuColor 3535 Color Manual
Fiery network controller
Hide thumbs
Also See for DocuColor 3535:
- User manual (268 pages) ,
- Installation manual (114 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
1
1-10 Fiery Color Management
CMYK Simulation Method
The CMYK Simulation Method allows you to define your preferred
CMYK-to-CMYK conversion technique.
•
applies one-dimensional transfer curves to adjust output densities in the cyan,
Quick
magenta, yellow, and black channels. This technique leads to pleasant color output
from your copier because pure primary colors are not "contaminated" by other
colorants. While it is the fastest simulation method and perfect for drafts, avoid
using it for final documents that will be used as press proofs. Other techniques offer
more color simulation accuracy, which is expected by proofing applications.
•
Full (Source GCR)
transformations. Hues are preserved, even for primary colors. The (GCR) level that
was specified in the original (source) document is also preserved. Full (Source GCR)
is therefore an excellent simulation technique for the highest quality press proofing
applications.
•
Full (Output GCR)
colorimetric transformations. Hues are preserved, even for primary colors. With this
method, the Gray Component Replacement (GCR) level that was specified in the
original document is not preserved. Instead, all CMYK data is reseparated using the
GCR level specified by the Output Profile. This simulation technique is similar to
traditional ICC color matching methods and is appropriate for most documents
designed for the press, but reproduced on your copier.
When you specify On for Pure Black Text/Graphics, and specify Full (Output
N
:
OTE
GCR) for CYMK Simulation Method, the black text and graphics in your document
are printed with 100% black-only toner.
Output profile
The output profile is applied to all data in the print job, so make sure the selected
profile is the right one for your job. The default output profile consists of both a profile
for your copier, describing its color characteristics, and a
describes the expected behavior of the copier.
The output profiles provided with the Fiery correspond to a screening method, and to
the region for which the screen methods were developed (U.S. or Europe).
provides a complete and accurate simulation based on colorimetric
is also a complete and accurate simulation method based on
calibration target
that
Advertisement
Table of Contents
