Xerox DocuColor 3535 Color Manual page 31

1
1-17 PostScript printer driver for Windows and Mac OS
Before you continue, complete the following procedures, as described in the
User Software Installation
• Install the AdobePS printer driver and the Fiery PPD.
• Select the Fiery in the Chooser and set it up with the Fiery PPD.
• Install the ICC output profile for the Fiery on your Mac OS computer (see the
User Software Installation
The following illustrations and instructions do not apply to all applications.
N :
OTE
Many applications, such as Adobe PageMaker, Adobe Photoshop, Adobe Illustrator,
QuarkXPress, and CorelDRAW, have other color management options in addition to
those presented in the printer driver. For information on specific applications, see the
Fiery Color Reference.
Setting color management print options
Choose settings for color print options from the various panes of the AdobePS driver
dialog box. To access the initial AdobePS dialog box, choose Print from the File menu
of your application.
The term "pane" is used to describe the different pages that appear in the driver
N :
OTE
dialog box when you make selections from the menu at the upper-left corner of the
dialog box. Each pane presents a particular set of print options.
The AdobePS driver includes the following Color Matching options.
•
Color/Grayscale
provides all color conversions on the Fiery. Typically, use this option when printing
to the Fiery.
•
PostScript Color Matching
It provides for color conversion using a color rendering dictionary (CRD) that is
downloaded with the print job. This method requires that the file is saved as an EPS
with PostScript Color Management selected.
If you use the PostScript Color Matching option, the driver may, depending
N :
OTE
on the application in use, attach a CMYK source definition to the CMYK data in
your document. In such a case, the CMYK data in the document is reseparated
using a Fiery CRD. The destination color space for the CRD is determined by the
RGB Separation print option. When RGB Separation is set to Simulation, CMYK
Guide:
Guide).
—When this setting is used to print to the Fiery, ColorWise
—Can be used with PostScript devices, such as the Fiery.