Overview; Minimum System Requirements - Xerox WorkCentre Pro 90 User Manual

Overview

The CopyCentre C65/C75/C90 WorkCentre Pro 65/75/90 has an integrated usage tracking and
control system known as the Internal Auditron. The Auditron provides the capability to track the
number of copies made by an individual user or copies charged to an account accessed by
multiple users.
The Auditron Report Software allows you to collect this data from the Xerox CopyCentre
C65/C75/C90 WorkCentre Pro 65/75/90 using a PC. Data can either be collected with a direct
connection to the machine, or can be remotely collected through a telephone line connection.
In order to establish the Auditron, a person referred to as the Auditron Administrator assigns
accounts to users (User Accounts) and assigns a User Number to each User Account. This User
Number, when entered at the machine, allows the user to make copies. The Administrator can
also assign any of the following Access Rights to any of the User Accounts:
• Machine Administrator
• Auditron Administrator
• General Accounts

Minimum System Requirements

• PC with 90 MHz. Pentium Processor
•
Microsoft Windows 95 (Service Pack 1 or OSR2), Windows 98, or Windows NT 4.0 (Service
Pack 3), Windows 2000, Windows XP
•
10 MB free on Hard Drive
•
32 MB RAM for Windows 95 or Windows 98, 64 MB for Windows NT 4.0
• A spare serial connection and a standard 9-pin serial (RS-232) throughput cable (for use only
when the PC is directly connected to the machine to collect data)
• Modem, PC phone access and Sixth Sense phone connection to the CopyCentre C65/C75/C90
WorkCentre Pro 65/75/90 (for remote data collection)
• CD-ROM drive or Floppy Drive
• Microsoft Access 97 or higher is recommended if data is to be collected in the .mdb format
• Adobe Acrobat Reader 3.0 or higher to view the instructions