Paper Handling - Xerox CopyCentre C35 Quick Reference Manual

Paper Handling

Repeated paper jams, misfeeds or multisheet feeds
Paper Jams inside the machine
Page 11-6
Ensure that the correct paper size is displayed on the Touch Screen.
Ensure that the paper tray is not filled above the MAX line.
Ensure that the edge guides are adjusted to touch the sides of the paper.
Flip the paper over in the paper tray, 'fanning' the edges of the paper to separate
the pages before reloading.
If the fault persists, remove the paper from the tray and load fresh paper,
'fanning' the edges of the paper first to separate the pages.
If the problem is not resolved, check for obstructions where paper enters the
machine.
Check the Paper Path for obstructions.
Ensure all the handles and levers are in the correct (home) position. The red
flashes behind the jam clearance handles and levers should not be visible. For
further assistance please refer to the graphic below.
Flip the paper over in the paper tray.
Check the paper tray Edge Guides to see if they are against the edges of the
paper.
Quick Reference Guide